A compact size compression latch with an open and close indicator incorporates D-SNAP Technology. / Until now, screws were required to secure a compression latch on a sheet metal panel. Now, this miniature compression latch, marketed under the SNAP-LINE brand, is simply snapped into place in the prepared panel. Compression latches provide quick and secure closure in applications where compression is required. The smooth function of the compression latch aligns the cam behind the frame. First, the cam is turned 90 degrees. Then, with a continuous turning motion the actuator pulls the cam towards the frame for secure latching and compression. These compression latches are recommended for use on any sheet metal cabinet. The integral red/green indicator allows a user to quickly identify if the latch is in the closed or open position. When the latch is open the red indicator is visible. By turning the easy-to-grip, serrated knob the cam moves into the latched position and the green indicator appears. Once latched, a further turning of the knob begins compression. This latch provides up to 8 mm of compression. Most other compression latches require a significant size or interior space. The small, compact size of this latch makes it suitable for applications where space is limited, but compression is required. The SNAP-LINE mini compression latch features a set of spring-loaded wings that are inserted into a channel in the latch housing. This allows the wings to move freely so they can be inserted into the panel cutout. As the wings retract after passing through the cutout, the SNAP-LINE mini compression latch is held securely in place, even in severe vibration applications. These latches can be used for blind assembly. Since the mini compression latch does not require mounting hardware, the risk of hardware loosening over time and damaging sensitive electronic equipment is eliminated. Different sizes of spring-loaded wings make it possible to use the mini compression latch in any sheet metal thickness. The bulge in the cutout guarantees a constant fitting. The mini compression latch is suitable for either RH or LH applications.