Advertisement
Materials and Prototyping

SMT Dry Cabinet Eureka XDC-2000 Ultra Low Humidity

March 25, 2015 12:24 am | Eureka Dry Tech | Products

Eureka XDC-2000 Ultra Low Humidity Dry Cabinet meets IPC/JEDEC J-Std-033 and IPC-1601 standards. Features Anti-static Glass, Paint, Shelves, Caster and 1 M Ω Ground Wire. Storage capacity of 1314 Liters. Controlled humidity range is ≤5% RH, Recovers to ≤ 5% RH within 30 minutes after accessing door for 30 seconds or less. Dimensions External- 120*193.5*76 cm (W*H*D) Features standalone German Digital TESTO Thermal Hygrometer for independent monitoring of humidity inside the cabinet. Power Consumption is 150 Watts and comes with standard lock. Optional features such as alarms, data logger, HEPA, etc. are available. Contact us today with your storage requirement and we will provide you with the best solution available on the market.

LISTED UNDER: Enclosures, Industrial | Drying Equipment | Electronic

SMT Dry Cabinet Eureka Ultra Low Humidity

March 25, 2015 12:09 am | Eureka Dry Tech | Products

Eureka Ultra Low Humidity SMT Dry Cabinet provides moisture controlled storage and handling environments of <5%RH, <10%RH, and <20%RH with speedy recovery times. Meets IPC/JEDEC J-Std-033C & IPC-1601 standards for resetting floor life and storage of components rated up to MSL 5a without harms caused by baking. Moisture sensitive components and devices packaged on SMT tape and reel can not be baked to remove moisture. Eureka's Dry Cabinet provides alternative drying methods to baking oven and nitrogen purge in moisture removal. Contact us today with your needs and we will provide you with the best solution.

LISTED UNDER: Enclosures | Enclosures, Industrial | Drying Equipment

Process Enclosure Series

March 17, 2015 9:37 am | by PD&D Staff | Product Releases | Comments

Flow Sciences has announced their Process Enclosure Series, designed and customized to protect process equipment and personnel. The EVP Series provides safety from chemical vapors generated during processes such as flash chromatography, evaporation from rotary evaporators, and other process ...

LISTED UNDER: Materials and Prototyping | Safety Equipment
Advertisement

Echo Printer & Enlarger

March 16, 2015 3:37 pm | by PD&D Staff | Product Releases | Comments

Graphic Products has announced Echo, a large format printer, scanner, and enlarger capable of printing large-scale banners in just minutes. Users can enlarge an existing document or picture using the built-in scanner; print from a gallery of stock posters; or print materials directly from a ...

LISTED UNDER: Marking Systems

Brazed Carbon Fiber

March 6, 2015 1:21 pm | by PD&D Staff | Product Releases | Comments

Morgan Advanced Materials has announced the development of a new capability of brazing carbon fiber, ceramics, composites, or other engineered materials directly to a titanium honeycomb. This technique ensures a final material that is strong, lightweight, and impact ...

LISTED UNDER: Materials and Prototyping | Carbon | Fiber

Digital Printing Service for Front Panels & Enclosures

March 5, 2015 9:53 am | by PD&D Staff | Product Releases | Comments

OKW’s metal enclosures division METCASE has announced new digital printing for front panels, rack cases, and instrument housings. METCASE’s digital technology means legends, logos, and complex photo quality graphics can be printed on front panels and enclosures quickly. Customers need ...

LISTED UNDER: Materials and Prototyping | Manufacturing/Services

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 3:12 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Cable, Electric | Connectors | Harness, Cable and Wiring

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 3:06 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: High Voltage | Cable, Electric | Connectors
Advertisement

Laser Research ZnSe Optics

February 25, 2015 12:22 pm | by PD&D Staff | Laser Research Optics | Product Releases | Comments

Laser Research Optic has announced a line of laser-grade zinc selenide (ZnSe) optics. Laser Research ZnSe optics are optimized at 1064 nm and 10.6 microns for Nd:Yag lasers and include plano-convex and plane-parallel discs, output couplers, and mirrors

LISTED UNDER: Materials and Prototyping | Zinc

12-Inch MiJET Parts Cleaning & Collection Unit

February 25, 2015 11:54 am | by PD&D Staff | Product Releases | Comments

Custom Service Solutions, Inc. has introduced its 12-inch MiJET parts cleaning and collection unit. This model has a larger diameter opening, permitting users to clean larger parts than the original 8-inch model. Using one existing shop air-line at your CNC machine, the pneumatically ...

LISTED UNDER: Manufacturing/Services | Cleaning

Military Armored Composite Crew Compartments

February 17, 2015 3:36 pm | by PD&D Staff | Product Releases | Comments

Morgan Advanced Materials has announced that survivability solutions offered by its Composites and Defence systems business are being used in customized armored composite crew compartments, suitable for reconnaissance and tactical vehicles, as well as Special Forces ...

LISTED UNDER: Materials and Prototyping | Ceramics

No Drip Siphon Fed Atomizing Nozzles

February 17, 2015 3:29 pm | by PD&D Staff | Exair Corp. | Product Releases | Comments

EXAIR has announced their siphon fed atomizing spray nozzles, which require no liquid pressure and can be used with gravity fed liquids or lift liquids from a siphon height as much as 36 inches (91 cm). Siphon fed nozzles can be used on liquids up to 200 centipoise ...

LISTED UNDER: Materials and Prototyping

InvisiPac GM100 Plug-Free Hot Melt Applicator

February 13, 2015 2:11 pm | by PD&D Staff | Product Releases | Comments

Graco Advanced Fluid Dispense has announced the InvisiPac GM100 Plug-Free Hot Melt Applicator, which offers all the benefits of plug-free adhesive dispensing in a compact design. The InvisiPac GM100 fits into tight spaces and mounts into existing packaging lines currently using ...

LISTED UNDER: Adhesives | Adhesive Equipment

Syncarb Crucible

February 10, 2015 11:07 am | by PD&D Staff | Product Releases | Comments

The Molten Metal Systems business of Morgan Advanced Materials has unveiled the latest addition to the Syncarb Z2 family of crucibles. The Syncarb Z2 e2 crucible was designed to provide strong chemical resistance against fluxes and suitable thermal conductivity in aluminum ...

LISTED UNDER: Alloys | Composites | Prototypes, Metal Fabrications

LIPUS therapy transducers

February 6, 2015 11:58 am | Piezo Technologies | Products

Meggitt Piezo Technologies has designed and manufactured low intensity pulsed ultrasound (LIPUS) transducers used in bone healing applications. Our designs accomodate both traditonal use of couplant gel configurations and gel-free structures. - LIPUS - User-defined electronics - Gel and gel-free couplants

LISTED UNDER: Piezoelectric Devices | Ceramics | Ultrasonic

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading