Advertisement
Electrical and Electronic Components

SMT Dry Cabinet Eureka XDC-2000 Ultra Low Humidity

March 25, 2015 12:24 am | Eureka Dry Tech | Products

Eureka XDC-2000 Ultra Low Humidity Dry Cabinet meets IPC/JEDEC J-Std-033 and IPC-1601 standards. Features Anti-static Glass, Paint, Shelves, Caster and 1 M Ω Ground Wire. Storage capacity of 1314 Liters. Controlled humidity range is ≤5% RH, Recovers to ≤ 5% RH within 30 minutes after accessing door for 30 seconds or less. Dimensions External- 120*193.5*76 cm (W*H*D) Features standalone German Digital TESTO Thermal Hygrometer for independent monitoring of humidity inside the cabinet. Power Consumption is 150 Watts and comes with standard lock. Optional features such as alarms, data logger, HEPA, etc. are available. Contact us today with your storage requirement and we will provide you with the best solution available on the market.

LISTED UNDER: Enclosures, Industrial | Drying Equipment | Electronic

SMT Dry Cabinet Eureka Ultra Low Humidity

March 25, 2015 12:09 am | Eureka Dry Tech | Products

Eureka Ultra Low Humidity SMT Dry Cabinet provides moisture controlled storage and handling environments of <5%RH, <10%RH, and <20%RH with speedy recovery times. Meets IPC/JEDEC J-Std-033C & IPC-1601 standards for resetting floor life and storage of components rated up to MSL 5a without harms caused by baking. Moisture sensitive components and devices packaged on SMT tape and reel can not be baked to remove moisture. Eureka's Dry Cabinet provides alternative drying methods to baking oven and nitrogen purge in moisture removal. Contact us today with your needs and we will provide you with the best solution.

LISTED UNDER: Enclosures | Enclosures, Industrial | Drying Equipment

Compact Quadpod with 400 W LED Light

March 13, 2015 10:11 am | by PD&D Staff | Product Releases | Comments

Larson Electronics has announced a 400 W quadpod mounted work light. Built to provide a high power lighting solution that requires minimal setup time, the WAL-LQP-400LTL-LED provides operators with a suitable lighting solution that features a quadpod with solid wheels for portability ...

LISTED UNDER: Light Sources
Advertisement

Board-to-Board, LED Connectors

March 11, 2015 2:43 pm | by PD&D Staff | Jst Corporation | Product Releases | Comments

The new LEK Series connectors introduced by JST Corporation provides a space saving and low profile connection for LED lighting. Any misalignment between the horizontal connections between the PCBs is absorbed by the LEK plug and receptacle. The spring contact in the receptacle is ...

LISTED UNDER: Connectors

Flexible Multiport Gigabit Ethernet Switch

March 10, 2015 5:18 pm | by PD&D Staff | Men Micro Inc. | Product Releases | Comments

MEN Micro Inc. has released the new G101, a managed 3U flexible multiport Gigabit Ethernet switch, with a 29 GBit/s switch matrix, implemented as a CompactPCI Serial board. Designed for rugged mobile communication in harsh environments, the new Ethernet switch conforms to the ...

LISTED UNDER: Switches

Enhanced LED Lamps

March 10, 2015 12:19 pm | by PD&D Staff | Product Releases | Comments

DELO has nearly doubled the intensity of its 400 nm LED area lamps. The DELOLUX 20 and DELOLUX 202 can now reach an intensity up to 600 mW/cm². With the increased intensity, the 400 nm area lamps allow for faster curing of different adhesives. The higher intensity also ...

LISTED UNDER: LEDs

Compact Terminal Block with Wire Release

March 10, 2015 12:06 pm | by PD&D Staff | Wago Corporation | Product Releases | Comments

WAGO’s compact 2059 Series PCB terminal blocks virtually eliminate on-board LED shadowing. With a 2.7 mm high, bright white profile the 2059 is a suitable connector for compact, miniaturized LED modules and bulbs. With the 2059, terminal blocks of different lengths can also ...

LISTED UNDER: Interconnectors

27 GHz Bandwidth Socket

March 9, 2015 6:12 pm | by PD&D Staff | Ironwood Electronics Inc. | Product Releases | Comments

Ironwood Electronics has introduced a high performance BGA socket for 1 mm pitch, 2577 pin BGA IC's. The SG-BGA-6422 socket is designed for IC size 52.5 x 52.5 mm and operates at bandwidths up to 27 GHz with less than 1 dB of insertion loss. The sockets are designed to ...

LISTED UNDER: Sockets (Electrical) | Adapters
Advertisement

Optional Simplified Automation User Interface

March 4, 2015 3:34 pm | by PD&D Staff | CAMI Research, Inc. | Product Releases | Comments

CAMI Research has announced an update to its CableEye Software enabling a Simplified Automation User Interface with its PC-based Cable and Harness Testing Systems. Applicable to all models in both low voltage and high voltage product lines, the update offers more options ...

LISTED UNDER: Cable, Electric | Connectors | Electrical

CableEye® M3U Cable Tester System: Item 821U

March 4, 2015 3:15 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Cable, Electric | Connectors | Harness, Cable and Wiring

Light Director™ Guided Assembly System: A CableEye® Accessory

March 4, 2015 3:12 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Cable, Electric | Connectors | Harness, Cable and Wiring

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 4, 2015 3:06 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: High Voltage | Cable, Electric | Connectors

DC-DC Railway Converter

March 4, 2015 1:13 pm | by PD&D Staff | Power Sources Unlimited Inc. | Product Releases | Comments

Power Sources Unlimited Inc. has announced the TEQ-WIR Series of 100, 160, and 200 W high performance DC-DC converters. The converters feature ultra-wide 4:1 input voltage ranges and have EN 50155 approval for railway applications. The ultra-wide input voltage range and ...

LISTED UNDER: DC

Multi-Range Industrial Timer/Counter Series

February 27, 2015 3:20 pm | by PD&D Staff | Product Releases | Comments

Automatic Timing & Controls, a division of Marsh Bellofram Corporation has announced its new Model 385AR series. The Model 385AR series is a multi-function, multi-range industrial timer/counter, offering 10 operating modes within a single unit. It is designed to accept standard ...

LISTED UNDER: Time, Automatic

SaBLE-x Bluetooth Smart Module

February 26, 2015 10:45 am | by PD&D Staff | Product Releases | Comments

LSR has announced the SaBLE-x Bluetooth Smart module. It is the first certified module solution based on the new TI SimpleLink Bluetooth Smart CC2640 wireless MCU. The SaBLE-x module offers suitable RF performance for BLE applications. Features include ...

LISTED UNDER: RF

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading