MIL-STD 883E calls for five shock pulses of 3,000 g (peak) with a pulse duration of 0.3 milliseconds in each of the orientations X1, X2, Y1, Y2, Z1, and Z2.
DURHAM, N.C. (October 13, 2009) — Nextreme Thermal Solutions today announced that its OptoCooler HV14 has passed the 3,000 g shock test as defined in the MIL-STD 883E Method 2002 Mechanical Shock standard.
The MIL-STD 883E Mechanical Shock standard establishes uniform methods, controls, and procedures for characterizing and screening microelectronic devices suitable for use within government and aerospace electronic systems. This includes basic environmental tests to determine resistance to the effects of natural elements and conditions surrounding government and space operations.
The shock test is intended to determine the suitability of the devices for use in electronic equipment which may be subjected to severe shocks as a result of suddenly applied forces or abrupt changes in motion.
MIL-STD 883E calls for five shock pulses of 3,000 g (peak) with a pulse duration of 0.3 milliseconds in each of the orientations X1, X2, Y1, Y2, Z1, and Z2.
ADVERTISEMENT
The modules showed less than a 5 percent change in electrical resistance as a result of the stress testing. The test report is available to qualified customers upon request.
The OptoCooler HV14 module is a high voltage and high heat pumping thermoelectric device that is designed to operate at standard electrical power requirements.
At 85°C, the HV14 operates at a maximum voltage of 2.7 V and can pump 1.5 watts of heat in a footprint of only 3mm².
The module can create a maximum temperature differential (ΔT) of up to 60°C between its hot and cold sides with a zero heat load, making it ideally suited for the cooling and temperature control of optoelectronic devices such as laser diodes, avalanche photodiodes and high brightness LEDs.
For more information visit www.nextreme.com/optocooler.