 The high flow regulator is offered in a 10-32 ported version “PRDHF” and a manifold mount version “PRDHF8”. |
Beswick Engineering (Greenland, NH) announces the release of an ultra-miniature single-stage diaphragm pressure regulator designed to provide greater flow than the Beswick “PRD” series regulators. The high flow regulator is offered in a 10-32 ported version “PRDHF” and a manifold mount version “PRDHF8”.
“PRDHF” High Flow Regulator
- 35 grams in brass & stainless steel and about 18.2 grams in aluminum.
- Output pressures from 0 to 30 psig.
- Low pressure regulation such as ½ psig.
- Maximum inlet supply pressure is 500 psig.
- Both inlet and outlet ports are tapped 10-32 UNF.
- 10-32 threaded panel mount option.
“PRDH8” Manifold Mount Version
ADVERTISEMENT
- 52 grams in brass and stainless steel.
- Inlet is a 5/16-24 UNF external thread and outlet port is through a 0.094” diameter hole at the base of the regulator body.
- O-ring face seals insure a leak-tight connection.