Product Design & Development

Popular Searches:

lockheed martin | 3d engineering | sears | sensors

RSS Feed
Follow us on Twitter
Search Our Archives

Green & Energy Efficient Design - Archives - January 2009

Loading...

Regular updates on new alternative fuel sources, power supply systems, materials, approaches and other components that can play a key role in improving energy usage models while assembling your bill of materials.

Optimize Board Space   1/29/2009
Tyco Electronics (Menlo Park, CA) announces the addition of new devices to its line of gas discharge tubes (GDTs ).   Continue
Smaller And Lighter   1/29/2009
Beswick Engineering (Greenland, NH) presents their smaller and lighterweight ball valves for miniaturizing pneumatic, hydraulic and other fluid systems.   Continue
Superior Hold   1/29/2009
Heyco Products (Toms River, NJ) announces the release of a new line of Snap-In Bumpers for through hole protection.   Continue
Improved Clamp Design   1/29/2009
Ruland Manufacturing Company (Marlborough, MA) has introduced a new clamp design for its zero-backlash flexible beam couplings. The couplings now clamp with a single screw on each end, which eases installation, and are balanced for increased RPM capability.   Continue
Cold Formed   1/29/2009
Sherex Fastening Solutions (Lancaster, NY) announces the launch of a fully cold formed version of M10 rivet nuts in 304 stainless steel.   Continue
Withstanding Greater Torque   1/29/2009
Zero-Max (Plymouth, MN) announces its introduction of Composite Disc Couplings for the wind turbine industry, which have even passed the "Hell Hole" test at Tehachapi, CA Wind Farm.   Continue
Offset Design   1/29/2009
DIRAK (Sterling, VA) offers their new 3-310 Swinghandle FS Offset-Duo-3 that has all the benefits of DIRAK swinghandles with the added benefit of saving valuable space inside the enclosure.   Continue
Self-lubricating Bearings And Thrust Washers   1/14/2009
The Metcar 1010 has a self-lubricating bearing grade option. Metallized Carbon Corporation provides customers with its Metcar 1010 Babbitt mechanical grade.   Continue
Improved Valve Design   1/8/2009
Series 3824 features a basket orfice design. Spartan Scientific’s Series 3824 direct acting, 2-way, 2-position or 3-way, 2-position, normally closed or normally open solenoid valve is designed to replace a fitting using a female inlet and male outlet port.   Continue
Negligible Vertical Flow   1/8/2009
Multi-Seals F05 Poly-forms ™ are flexible pre-shaped adhesives designed for bonding diverse materials, including metals, plastics, and glass. Multi-Seals introduces an innovative alternative to liquid adhesive for component assembly.   Continue
 1  2  > 

ARCHIVES
      2009        Jan   •   Feb   •   Mar   •   Apr   •   May   •   June   •   July   •   Aug   •   Sept   •   Oct   
      2008        Jan   •   Feb   •   Mar   •   Apr   •   May   •   June   •   July   •   Aug   •   Sept   •   Oct   •   Nov   •   Dec   
      2007        Jan   •   Feb   •   Mar   •   Apr   •   May   •   June   •   July   •   Aug   •   Sept   •   Oct   •   Nov   •   Dec   
Show Previous Years

At Issue

Don’t Bet On It
Karen Langhauser, Editor-in-chief, Food Manufacturing
Notes From The Real World
Mike Rainone, Co-Founder of PCDworks
More At Issue
Loading...
PD&D Design Engineer Hall of Fame Nominees
Vote Now

Forums

Your opinion matters, opening a new product design shop
Your opinion matters to me, while I get ready to launch a new product design shop.  I need your opinion in this short 10 questions survey so I could "get it right". Product design survey   Continue

new machine lubrication concept
new machine lubrication concept Hi It is worthy to note an MIT study calculated that six to seven percent of America’s Gross National Product is spent repairing wear damage caused by poor lubrication. Those numbers are from a dow corning  Continue

Technology In The New Administration
I really don't think that this President is looking for a break although I am sure that he will take one if it is in the offering. He seems to welcome criticism, contemplate it and if need be make adjustments.  Continue

More Forums

This Week's Poll

Is the recession a result of a lack of innovation in America?

View Previous Polls

Site Sponsors

Advantage Business Media© Copyright 2009 Advantage Business Media
Privacy Policy | Terms & Conditions | Advertise With Us | Login | Register