Seeloc self-sealing washers feature a silicone rubber section bonded to a specially-formed stainless-steel washer. Other washer and sealing materials are available for specific applications.
The P44W is a fully encapsulated dc-ac inverter for powering automotive LCDs such as those used in GPS navigational systems and audio and video entertainment displays in car interiors.
The MDE Series of long life, brushless dc axial flow fans features a 100,000-hour life expectancy for lower maintenance and reduced down time. A zero rotation alarm signal protects equipment form overheating and increases reliability. The series is available in two sizes. The MDE1225 has a 4.69 in.
The five-port rugged, fully connected Industrial Ethernet Switch includes five 10/100 Mbps eight-pin eurofast ports to segment network traffic, extend Ethernet connection distance, and convert data packets between different transmission speeds. The switch complies with IEEE 802.3 and 802.
CN Series increased safety control enclosures are intended to house electrical equipment that will not generate an arc or spark during normal operation and in which surface temperatures are controlled below incendive values.
Plexus MA557 is a two-part methacrylate adhesive designed for the structural bonding of large assemblies including those in boats, trucks, and buses.
Two acrylic adhesive transfer films, Unifilm U621A and Unifilm U624A, are designed for a range of automotive assembly applications. They are suitable for high-temperature gasketing applications and precision die cutting for component assembly.
Tra-Bond 2156 is a thermally conductive epoxy designed for bonding transistors, diodes, resistors, integrated circuits, and other heat sensitive components to circuit boards.
ARclad 8891 is a double-faced, polyester-supported pressure-sensitive splicing tape with an aggressive, permanent acrylic adhesive. It offers high heat resistance as well as resistance to humidity and other moisture conditions. It's also flexible, conforming to curved surfaces such as rollers.
The 3.9-mm diameter XL Pro is a miniature, fully articulated video borescope with measurement capability. It is designed to fit deep inside minute and virtually inaccessible spaces where inspections are crucial.
New Easy-Mount mounting clips for accelerometers allow for practical and economical installation of accelerometers in the modal analysis and structural testing of automobiles, aircraft, satellites, trains, and other large channel-count vibration testing applications.
The DPI 605 is a portable calibrator boasting accuracy certified within 0.025 percent of reading for values between 1 and 100 percent full scale for non-linearity, hysteresis, and non-repeatability. For values below 1 percent, accuracy is ۪.000725 psi.
The Model CA10 thermocouple calibrator can be used as a secondary calibration source for applications using Type K thermocouples. It is able to source and measure temperatures from -40° to +1,400°F. It has an accuracy of ۪.1 percent and a reading rate of 2.5 times per second.
The Lightning leak detector is designed to make leak testing fast and simple. It can reduce test cycle times by 80 percent due to easy setup and programming. It performs pressure decay leak testing sensing pressure changes to 0.00005 psi.
The Traceable digital relative humidity/temperature meter is suitable for routine measurements, monitoring round-the-clock quality-control needs, and critical experimental requirements. The instrument shows the exact air conditions in a wide range of applications.