Series 20 Cam Switches feature a small footprint designed to reduce the space required on power industry control panels. These instrument and control switches can be mounted on 3-in. centers and can be built with up to 12 decks and 12 positions.
The Ashcroft N-Series electronic indicating pressure switch provides pressure indication and switch functions in one package. This solution also adds transmission capability to the package with a 4-20 mA output signal.
A new Synchronous Serial Interface M-Module mezzanine card is designed to simplify the monitoring and controlling of shafts and other moving parts in machine tools, automation systems, test and measurement equipment, and other industrial systems.
The One Series 2-Wire pressure switch detects blockage of the sensor port due to process debris, slurries, or crustation build-up.
RedHat Next Generation solenoid valves integrate a power management circuit into the solenoid, which adds new benefits and provides enhanced operation. The unit uses 2 W of power and is designed to provide the same performance as a 17-W ac solenoid valve.
Premier conductive thermoplastics are formulated for high-performance EMI shielding and grounding in electronic devices. Premier molded plastic parts feature a proprietary dispersion of long, nickel-plated carbon fibers in a choice of resin matrices.
A line of ball valves constructed of Corzan CPVC has been designed for on/off service. These "fail-safe" actuated units can be used in applications that require elevated temperatures and corrosion resistance. The actuator closes the valve automatically in the event of power failure.
A miniature four-digit LCD has characters that are 0.174 in. high. Called the Model LCD-S401M14TF, it incorporates three decimal points, allowing numbers ranging from 0.001 to 9,999 to be displayed. It also includes units of measure for pressure indication in PSIA, MPa, and kPa.
Thermofoil heaters with PTFE insulation are suitable for applications where caustic or corrosive chemicals are present. At 0.025-in. thin, these heaters are resistant to most acids and bases.
The HP7x high-pressure dispensing tool is designed to let workers apply small dots of extremely thick assembly fluids through small gage tips. It multiplies dispensing pressure by a 7:1 ratio so that 100 psi of input produces 700 psi of air pressure inside a reservoir within the unit.
The DMC-21x3 Ethernet motion controller incorporates a low-cost 96-pin DIN connector while eliminating the need for cable between the controller and interconnect board.
The Model D1250T Telefuse is a powercross protection fuse designed for use in telecommunications circuit applications requiring low current protection with high surge tolerance.
The BB705 is a black body temperature reference source that is adjustable from 100° to 1,046°C and is accurate to ۫°C, ۪.25 percent rdg. It has a built-in digital temperature controller to provide stable temperatures as well as to provide temperature readings of the cavity.
"There is an increasing demand for lipid- and alcohol-resistant components as well as for gamma and e-beam sterilization-tolerant materials," says Mark Emory of Industrie Borla in Torino, Italy. Borla is a manufacturer of plastic and rubber components for disposable medical devices.
A half-length PCI card provides one internal and four external USB 2.0 ports. Designated the COU 105P, the card provides five Type A ports, each capable of moving data at 480 Mbps and fully backward compatible with USB 1.1 devices.