A new Synchronous Serial Interface M-Module mezzanine card is designed to simplify the monitoring and controlling of shafts and other moving parts in machine tools, automation systems, test and measurement equipment, and other industrial systems.
A miniature four-digit LCD has characters that are 0.174 in. high. Called the Model LCD-S401M14TF, it incorporates three decimal points, allowing numbers ranging from 0.001 to 9,999 to be displayed. It also includes units of measure for pressure indication in PSIA, MPa, and kPa.
A line of ball valves constructed of Corzan CPVC has been designed for on/off service. These "fail-safe" actuated units can be used in applications that require elevated temperatures and corrosion resistance. The actuator closes the valve automatically in the event of power failure.
Premier conductive thermoplastics are formulated for high-performance EMI shielding and grounding in electronic devices. Premier molded plastic parts feature a proprietary dispersion of long, nickel-plated carbon fibers in a choice of resin matrices.
Thermofoil heaters with PTFE insulation are suitable for applications where caustic or corrosive chemicals are present. At 0.025-in. thin, these heaters are resistant to most acids and bases.
The HP7x high-pressure dispensing tool is designed to let workers apply small dots of extremely thick assembly fluids through small gage tips. It multiplies dispensing pressure by a 7:1 ratio so that 100 psi of input produces 700 psi of air pressure inside a reservoir within the unit.
The BB705 is a black body temperature reference source that is adjustable from 100° to 1,046°C and is accurate to ۫°C, ۪.25 percent rdg. It has a built-in digital temperature controller to provide stable temperatures as well as to provide temperature readings of the cavity.
The Model D1250T Telefuse is a powercross protection fuse designed for use in telecommunications circuit applications requiring low current protection with high surge tolerance.
The DMC-21x3 Ethernet motion controller incorporates a low-cost 96-pin DIN connector while eliminating the need for cable between the controller and interconnect board.
"There is an increasing demand for lipid- and alcohol-resistant components as well as for gamma and e-beam sterilization-tolerant materials," says Mark Emory of Industrie Borla in Torino, Italy. Borla is a manufacturer of plastic and rubber components for disposable medical devices.
A half-length PCI card provides one internal and four external USB 2.0 ports. Designated the COU 105P, the card provides five Type A ports, each capable of moving data at 480 Mbps and fully backward compatible with USB 1.1 devices.
The ALH25AF48 is a dual-output, half-brick dc/dc converter. It stands 0.45 in. above the PC board and delivers up to 100 W of output power to the loads at a typical efficiency of 88 percent. With the capacity to deliver up to 20 A from its 5 V output and 25 A from its 3.
The SPW-3500 Series is an international PC power transformer suitable for domestic or world market applications. Dual winding primaries and secondaries feature input voltages of 115/230 V, 50/60 Hz and output voltages ranging from 5 to 120 Vac at 6 VA.
Four new wiring devices have been added to a dc product line. First is the 12-V 12VRCTT (thin terminal) receptacle, which features two different NEMA connection tabs to prevent misconnection during installation. The second is the 12VPG2A, which is a 12-V plug fused at 2 A.
The Rena 301ES air pump, which combines a simple design, low maintenance, and rugged construction, is suitable for OEM applications such as air sampling, ozone generation, water purification, and medical device components.