The Leading Source for Design Engineering News & Insight
High-pressure Adhesive Dispensing Tool
December 30, 2002 11:18 am | Efd, Inc. | Product Releases | CommentsThe HP7x high-pressure dispensing tool is designed to let workers apply small dots of extremely thick assembly fluids through small gage tips. It multiplies dispensing pressure by a 7:1 ratio so that 100 psi of input produces 700 psi of air pressure inside a reservoir within the unit.
Calibration Source
December 30, 2002 11:18 am | Omega Engineering, Inc. | Product Releases | CommentsThe BB705 is a black body temperature reference source that is adjustable from 100° to 1,046°C and is accurate to ۫°C, ۪.25 percent rdg. It has a built-in digital temperature controller to provide stable temperatures as well as to provide temperature readings of the cavity.
Telecommunications Protection Fuse
December 30, 2002 11:18 am | Bourns Inc. | Product Releases | CommentsThe Model D1250T Telefuse is a powercross protection fuse designed for use in telecommunications circuit applications requiring low current protection with high surge tolerance.
Motion Controller With Interconnect Module
December 30, 2002 11:18 am | Galil Motion Control | Product Releases | CommentsThe DMC-21x3 Ethernet motion controller incorporates a low-cost 96-pin DIN connector while eliminating the need for cable between the controller and interconnect board.
Acrylic Compound Helps Medical Oems Reach New Markets
December 30, 2002 10:34 am | Cyro Industries | Product Releases | Comments"There is an increasing demand for lipid- and alcohol-resistant components as well as for gamma and e-beam sterilization-tolerant materials," says Mark Emory of Industrie Borla in Torino, Italy. Borla is a manufacturer of plastic and rubber components for disposable medical devices.
Half-length Pci Card
December 30, 2002 10:23 am | Cyberresearch, Inc. | Product Releases | CommentsA half-length PCI card provides one internal and four external USB 2.0 ports. Designated the COU 105P, the card provides five Type A ports, each capable of moving data at 480 Mbps and fully backward compatible with USB 1.1 devices.
Dual-output, Half-brick Dc/dc Converter
December 30, 2002 10:23 am | Astec Power | Product Releases | CommentsThe ALH25AF48 is a dual-output, half-brick dc/dc converter. It stands 0.45 in. above the PC board and delivers up to 100 W of output power to the loads at a typical efficiency of 88 percent. With the capacity to deliver up to 20 A from its 5 V output and 25 A from its 3.
International Power Transformer
December 30, 2002 10:23 am | Prem Magnetics, Inc. | Product Releases | CommentsThe SPW-3500 Series is an international PC power transformer suitable for domestic or world market applications. Dual winding primaries and secondaries feature input voltages of 115/230 V, 50/60 Hz and output voltages ranging from 5 to 120 Vac at 6 VA.
Corrosion-resistant Wiring Devices
December 30, 2002 10:23 am | Product Releases | CommentsFour new wiring devices have been added to a dc product line. First is the 12-V 12VRCTT (thin terminal) receptacle, which features two different NEMA connection tabs to prevent misconnection during installation. The second is the 12VPG2A, which is a 12-V plug fused at 2 A.
Reversable Pressure/vacuum Air Pump
December 30, 2002 10:23 am | Product Releases | CommentsThe Rena 301ES air pump, which combines a simple design, low maintenance, and rugged construction, is suitable for OEM applications such as air sampling, ozone generation, water purification, and medical device components.
Thermostats With 25 A Capacity
December 30, 2002 10:23 am | Selco Products Co. | Product Releases | CommentsT Series automatic reset encapsulated thermostats feature a dry seal design for protection against moisture, dust, water, and oil. The units are suitable for humid environments in the HVAC and refrigeration industries – particularly for freezer, refrigerator, and air conditioner applications.
Intermatable Battery Connectors
December 30, 2002 10:23 am | Anderson Power Products | Product Releases | CommentsThe Euro Battery Connector family features capabilities for 80, 160, and 320 A applications. The design is intermatable with all existing DIN 43589-1 auxiliary contact systems. Units allow the voltage-key to remain in place when acid/air circulation is used.
Friction Clutch With ''snap-on'' Gear
December 30, 2002 10:23 am | Product Releases | CommentsThe compact CS-08 Series friction clutch features a "snap-on" gear. The modular clutch boasts easy assembly because no hardware or tools are needed to mount the gear. It can be used in office automation and light industrial applications.
Pressure/vacuum Transducer
December 30, 2002 10:23 am | Product Releases | CommentsThe HPS Series 901 loadlock transducer is a combination piezo and pirani sensor with an integrated electronic control circuit, digital communications, analog output, and three setpoints. The CE-marked unit combines a MicroPirani vacuum gauge and an atmosphere switch (piezo) in a compact package.
Ultra-thin Supercapacitors
December 30, 2002 10:23 am | Product Releases | CommentsPowerStor F Series supercapacitors are ultra-thin flat units that use a thin, aluminum foil-polymer laminate package instead of a thick metal can. Units can be under 1 mm in thickness.
