Designed to facilitate telco and industrial computer applications, the CMP/DMP Compact Peripheral Component Interface (CPCI) power supply family is based on the PCI Industrial Computer Manufacturers Group specification 2.11.
PolyTect Soft Molding, an engineering grade polymer, is for overmolding fully populated PC boards. There are three different base materials in the PolyTect product line.
KTU6000 pressure transmitters have an operating pressure that ranges from 15 to 2,000 psi gage or absolute. Any preferred pressure unit and intermediate span between these limits can be specified. Typical accuracy is 0.1 percent for combined non-linearity and hysteresis.
ColdSNAP thermometers consist of a bi-metallic sensing element that snaps at a pre-determined temperature, turning an indicator window bright red.
The Model TH transmitter for HART communication can be configured with a PC and HART modem. The unit allows thermocouple and RTD sensors to be integrated with systems and equipment using HART. The transmitter offers an accuracy of ۪.01 FRI and ۪.07 percent Rdg.
The EMP402 is a dual-axis programmable motion controller for coordinated motion for dual 2- or 5-phase hybrid stepping motor systems. It provides the pulse train for controlling motors for both high-speed motion and positioning.
A new Clamped-Split-Quill mounting system for oil-shear clutch/brakes offers the convenience of double C-face mounting . The design stops play, which can deform the key and keyway in high-torque, rapid-cycling operations.
The Model 755A Round Series Accu-Coder encoder boasts low temperature capability, allowing operation in environments as low as -40°C. The Size 15 encoder is a full capability 1.5 in. unit with resolutions up to 30,000 cycles per revolution.
Boasting a maximum depth behind a panel of less than one inch, YB Series illuminated short-body pushbuttons are rated 3 A @ 125 Vac, 3 A @ 250 Vdc, and 3 A @ 30 Vdc for the power model and 0-4 VA maximum at 28 Vac/dc maximum for the logic level version.
New compact 101 and 102 Series Flo-Sensors are engineered to provide precise liquid flow measurement. They can be constructed from plastic or brass and offer a 0-5 Vdc analog output proportional to flow rate. Flow rates can be measured as low as 13 mL/minute.
The Type KR15 LM Guide actuator combines a miniature LM Guide and a miniature ballscrew in one block. The actuator's use of four-row circular contacts is designed to result in high rigidity and low fluctuation of rolling resistance under a load.
Suitable for high-speed metal cutting, woodworking, milling, and other precision machine tool
MAV-2R and MAV-3R poppet valves boast a short length and side ports to ease installation in tight spaces. These stem-operated, normally closed devices have a rotatable side inlet that can be positioned to align with the outlet or at any angle through 360 degrees.
Rotaflon seals have been developed for such high-intensity operating conditions as high surface speed, high temperature, high pressure, and insufficient lubrication conditions that previously eliminated the successful use of most elastomeric-type seals for rotating shafts.
Featuring fully integrated intelligent servomotors, new self-contained SmartDigit and SmartBug linear actuators feature an optical encoder, digital servo amp, indexer, local power supply, and serial communications interface. Absolute position is optional.