The APC730 line of multifunction I/O boards are designed for desktop PCI applications. The AcPC730 line is available for CompactPCI applications.
The 3000 Series is a line of weighing controllers that can send and receive e-mail messages, giving users the ability to receive rapid notification of important events or alarms in process. The e-mails can be forwarded to a PC by way of a mail server, pager, or WAP-enabled cell phone.
A new system combination is comprised of the SW0 load cell and TM0-2 amplifier/conditioner. The system is suitable for a variety of industrial and OEM force measurement and weighing applications.
New fast-curing epoxy adhesives require no fixturing. Available in three formulations, they are suitable for a multitude of OEM assembly applications. They boast good dielectric strength and withstand service temperatures of -40° to +200°F (dry).
The Ethernet TCP/IP programmable Fieldbus controller, part number 750-841, features 100Mbits/s Ethernet, IEC-61131-3, and the latest open architecture software interfaces and protocols.
The Model 4283-1300 fine wire high-voltage transformer delivers 0.2 W continuous power and boasts a wide operating temperature range. The transformer is a surface-mount device that can be custom configured to meet a variety of military, medical, automotive and aerospace needs.
These reflective mark sensors have better than 0.01 in. resolution. They are suitable for limited space applications in bar-code slot readers, time and attendance equipment, currency validation equipment, and devices where a fine edge or mark requires sensing.
GP Series snap-action switches provide actuator travel differentials as low as 0.002 in. and mechanical endurance of more than 1 million cycles. They are suitable for heavy-duty applications such as factory automation, industrial vehicles, elevators, and valves.
This new analog RGB monitor kit has an 8.4 in. diagonal LCD panel featuring the XGA resolution (1024 x 768) normally used for larger panels. It includes an industrial analog controller, data cable, and matching backlight inverter with cable.
These iSeries meters and controllers have a display that can be programmed to change colors (red, amber, green) at any set or alarm point. For example, the display can be programmed to show the process value in green during warm-up and then switch to amber to signal the normal operating range.
Duralan II A/R anti-reflective coating is formulated for flat-panel displays that are used in high ambient light environments. They are suitable for use with laptops and portable handheld devices that are frequently used outdoors where sunlight readability is important.
Cups made of Duraflex material are available in various durometers. Cups with stiffer durometers are suitable for applications in the automotive market because of their oil resistance capabilities.
Leoni-HPF flat cables, featuring the technology of low-density jacketing, are designed for tens of millions of flex cycles over a small bend radius.
AREAscan DS3 Series light grids provide advanced object detection and measurement solutions for a wide range of industrial applications. The light grids, which are available in two lengths, can detect differences as small as 6 mm in similar objects and detect objects as small as 0.5 mm in length.
The Digital Quartz Inertial Measurement Unit incorporates solid state quartz micro-machined inertial sensors. Featuring small size and low power, it's suitable for guidance, navigation, and control for commercial, aerospace, and defense applications.