KT Series temperature controllers have an accuracy of 0.1 percent RTD 0.2 percent for thermocouple sensors with very small overshoot due to proprietary PID and an auto-tuning algorithm.
MC 150, 225, and 600 Series industrial shock absorbers boast significant increases in energy per cycle (E3) ratings. As a result of an improved design, some self-compensating models have the energy capability of former larger-sized middle bore models.
EP21HT is a two-component, room-temperature-curing epoxy adhesive with a 1 to 1 mix ratio, weight, or volume. It is 100 percent reactive, contains no solvents or volatiles, and bonds to both similar and dissimilar substrates including metals, glass, ceramics, wood, rubbers, and many plastics.
The MotionXtra HG-100K camera features a 1.7 megapixel CMOS sensor capable of recording 1,000 frames per second (fps) at full resolution and up to 100,000 fps at reduced resolutions. The camera is built around a 1504 x 1128 sensor for high-resolution images.
Multi-Cure 621-VT is a one-component adhesive designed to provide strong bridge bonds that cure in 1-10 seconds upon exposure to the BlueWave 200 spot light curing system. It is one of several new light- and activator-curing adhesives engineered to make the automation of ungapped cores easier.
New air cylinders for basic tooling and automation applications feature the low-profile configuration common to disposable cylinders but have heavier walls for rugged service and treaded end caps for easy repair and seal replacement.
The 9000DS dispensing system combines 9000 Series metering pumps and stepper motor control technology with a simple Palm PDA interface. The PDA interface boasts quick setup, intuitive programming, and easy operation of a wide variety of dispensing applications.
Bus bars, in general, serve as customary methods to distribute high current from power supplies to components. One company, however, is designing bus bars to provide a power-distribution solution that is custom-made to meet specific application requirements. Eldre Corp.
A line of therapeutic saddle pads has been designed to take pressure off horses. Featuring a Stimulite honeycomb cushion fabricated with Stevens Urethane thermoplastic polyurethane sheet, these saddle pads from Supracor Inc.
Manufacturers of high-performance bicycles and accessories such as handlebars, bar ends, and seat posts are turning to state-of-the-art adhesives to produce durable joints on substrates including aluminum, titanium, and fiber composites.
New programmable analog laser distance sensors offer resolutions to four microns. They provide longer range measurement with sensing distances of up to one meter. Response times as fast as 900 microseconds allow sensors to track very high-speed applications. Baumer Electric, 122 Spring St.
The LPF-C041304S right-angle quad LED fault indicator is a passive light guide for use with surface-mount LEDs. It snaps into any standard circuit board, fitting over four surface-mount LEDs. It's right-angle design carries the light from the LEDs to a front panel. Pricing starts at $1.45.
The KL3403 power measurement terminal allows engineers to incorporate measurement and control of three-phase motors into the Bus Terminal I/O system. Pre-processing within the KL3403 provides rms values in the process image, without requiring high computing capacity on the controller. Price is $175.
Hydrogen fuel-cell technology for automobiles can create pollution-free vehicles, a nearly unlimited fuel source, and an alternative to dependence on foreign oil supplies.
The High-Load Life A line of needle roller bearings adds life to high-load industrial applications. Commercial and PrecisionApplications Designing high-load equipment such as hydraulic pumps used on farm equipment or refuse trucks often requires bearings with a long life.