Brazepak heat exchangers are designed for applications requiring compact units with high thermal efficiency that can withstand high pressures and temperatures.
The Digital VT vacuum indicator is a self-contained device that offers vacuum measurement for DV-4 and DV-6 gauges tubes and is interchangeable with existing analog versions. The Digital VT offers a three-digit LED display, a 1/8 DIN package, and a wall transformer with 5 V output.
The HSAR/HSDR 750 Series of hermetically sealed LVDTs are designed for operation in hostile environments containing caustic or corrosive materials. Constructed of stainless steel, these 3/4 in.
Series P2 flow switches are designed for both air and pure water applications, filter life monitoring, heat exchangers, and cooling applications. They feature a piston-type design that incorporates a hermetically sealed SPST magnetic reed switch.
New SIP circuit protection modules are integrated devices that combine fuses, overvoltage protectors, and resistor networks into a vertical-mount SIP configuration to conserve PC board real estate. Designed for the broadest range of telecom applications, the modules feature 1.
The 3G3RV ac inverter features a high-slip braking function for intermittent braking applications to shorten motor stopping time by one-third without using braking resistors.
IntelliScan and UniScan non-contact ultrasonic level measurement instruments can measure liquids, solids, and open-channel flow. They adjust to virtually all types of conditions and feature automatic ambient temperature adjustment.
KT Series temperature controllers have an accuracy of 0.1 percent RTD 0.2 percent for thermocouple sensors with very small overshoot due to proprietary PID and an auto-tuning algorithm.
MC 150, 225, and 600 Series industrial shock absorbers boast significant increases in energy per cycle (E3) ratings. As a result of an improved design, some self-compensating models have the energy capability of former larger-sized middle bore models.
EP21HT is a two-component, room-temperature-curing epoxy adhesive with a 1 to 1 mix ratio, weight, or volume. It is 100 percent reactive, contains no solvents or volatiles, and bonds to both similar and dissimilar substrates including metals, glass, ceramics, wood, rubbers, and many plastics.
The MotionXtra HG-100K camera features a 1.7 megapixel CMOS sensor capable of recording 1,000 frames per second (fps) at full resolution and up to 100,000 fps at reduced resolutions. The camera is built around a 1504 x 1128 sensor for high-resolution images.
Multi-Cure 621-VT is a one-component adhesive designed to provide strong bridge bonds that cure in 1-10 seconds upon exposure to the BlueWave 200 spot light curing system. It is one of several new light- and activator-curing adhesives engineered to make the automation of ungapped cores easier.
New air cylinders for basic tooling and automation applications feature the low-profile configuration common to disposable cylinders but have heavier walls for rugged service and treaded end caps for easy repair and seal replacement.
The 9000DS dispensing system combines 9000 Series metering pumps and stepper motor control technology with a simple Palm PDA interface. The PDA interface boasts quick setup, intuitive programming, and easy operation of a wide variety of dispensing applications.
Bus bars, in general, serve as customary methods to distribute high current from power supplies to components. One company, however, is designing bus bars to provide a power-distribution solution that is custom-made to meet specific application requirements. Eldre Corp.