The 3G3RV ac inverter features a new high-slip braking function for intermittent braking applications. It's designed to shorten motor stopping time by one-third without using braking resistors.
The RHCM Series is a family of high-performance chilled mirror dewpoint transmitters. The sensors are designed to provide accurate long-term repeatability and reliable performance for process control and energy management.
This high-speed brushless dc motor is suitable for machine tool spindles and other high-power applications. Even at speeds up to 21,000 rpm, the motor is designed to be extremely quiet and vibration-free largely attributable to its dual-plane rotor balancing.
The flareMOVE Series of pluggable terminal block relays boasts higher contact current ratings 16 A versus 6 A. The new relays are offered in both SPDT and DPDT contact configurations. A key feature of flareMOVE relays is they provide a reverse voltage protection diode on the coil.
Lead screws, linear rails, spline shafts, and ScrewRail actuator assemblies are now offered with Kerkote TFE coating. The coating is designed to reduce friction and extend assembly life in motion control applications.
The Smart Linear Actuator (SLA) modular automation system allows numerous system configurations in two- or three-axes, satisfying the requirements for automated applications where high accuracy and multiple pick-and-place positions are desired.
The composite fiberglass Breather Vent is a non-metallic vent that allows the enclosure to "breathe" so that there is a free passage of air.
The 852J2D27 is an Interpower accessory power strip with connector locks. It is designed to help equipment manufacturers supply power to system accessories and peripherals while conforming to electrical standards worldwide.
These precision ground ball screws feature an internal recirculation system to promote durability and high performance in the most demanding linear-actuation applications.
The Hobbs emergency stop switch, which features an environmentally sealed design incorporating two circuits with multiple combinations, has been engineered for severe temperatures.
This insulated tubing, designed to be a cost-effective alternative to field-installed insulation used in small diameter process lines, is formulated to reduce heat loss and protect personnel from hot process and steam lines.
A new line of fiber-optic switching devices incorporates a combination of glass and plastic. The glass and plastic design creates optical devices that increase design flexibility and enable a short focus length. They can also be fabricated at a high speed.
A line of silicone foam gaskets and cushioning pads is supplied in custom die cut, water jet cut, and slit-to-width configurations. The silicone foam is produced from new liquid silicone rubber technology, and many grades are flame-retardant meeting UL94V-0 and UL94HF-1 standards.
The CL-408 module is designed to put operators in control of high power components in off-road equipment. It enables joysticks and other control devices to interface with machine bidirectional servos, valves, and solenoids. Designers can configure the CL-408 as a slave module in a CAN system.
New rotary tap switches are designed to support a variety of industrial applications. Available in molded- and fabricated-base designs, these heavy-duty units can be configured for either manual or motor operation.