Pittman LO-COG 22-mm brush-commutated dc motors are appropriate for applications requiring the power of an "ironless core" or coreless motor without the associated cost.
The OMB-DAQBoard-2004 is a high-performance PCI-based 16-bit analog output board priced at $749. It offers four 16-bit 100-kHz analog outputs, which can range from -10 to +10 V.
EP21AO is a two-component, thermally conductive, electrically isolating epoxy adhesive with a forgiving 1-to-1 mix ratio by weight or volume. It adheres to a variety of similar and dissimilar substrates, has a low coefficient of expansion, and boasts low shrinkage and high dimensional stability.
The goal of the CSNX Series sensor is to provide stable, repeatable, accurate current measurement. It uses an ASIC and a magnetoresistive magnetic sensor to provide the extremely low offset drift of 3.2 ppm/°C over -40°C to +85°C.
The SCG-16A dynamic speaker boasts broad frequency response characteristics, including wide resonant peaks, that allow for the creation of numerous audio tones.
The 20300 Series low differential pressure transmitters have been designed as low-cost alternatives for HVAC, wafer fab, pharmaceutical clean room, laboratory, and hospital applications. Price is $128.
The HandyLink connector system has been designed for cellular phones, PDAs, retail scanners, bar-code readers, GPS devices, human and vehicular tracking devices, and portable medical and industrial devices. With a 0.8 mm pitch, it promises higher current capabilities than other devices.
LWG Series position transducers, featuring standard M12 connectors, have backlash-free pivot heads to provide the free movement required in mechanical, automotive, and robotic applications. They combine linearity to ±0.05 percent with resolution better than 0.01 mm.
New single-port MagJack integrated connector modules are magnetic-based solutions for high-speed networking and computing applications.
With prices starting at $16 in OEM quantities, the OFM 40/60 Series of ultra-miniature open-frame modular switching power supplies offers output power of 40 and 60 watts. All models accept universal input from 85 to 265 Vac.
Designed for LCDs backlit by two cold cathode fluorescent lamps, the DMW Series inverter offers closed loop current control over an input voltage range of 8-18 Vdc. It monitors lamp current to maintain consistent brightness, regardless of variations in input voltage.
SLL phase monitors protect motors, pumps, and compressors against phase loss, over- and under-voltage, unbalance, and incorrect phase sequence.
AC65 motors are designed to resist damage caused by heat buildup and by "dirty voltage" spikes from lower speed operation while under torque load. Measuring 2.88 in. square at the endbell and 5.22 in.
The Mink is a rotary claw-type positive-displacement pump designed for either pressure or vacuum applications. The pressure pump is available in six sizes with a maximum pressure of 29.4 psig. The vacuum pump comes in six single-stage sizes and two two-stage sizes with a maximum vacuum of 29.3 in.
Three new products an Ethernet I/O assembly, an industrial power supply, and an intelligent breakout board have been engineered to help provide easier industrial machine vision solutions. In fact, their goal is to make machine vision systems easier to integrate.