The Leading Source for Design Engineering News & Insight
Differential Pressure Switch For Proximity Sensing
August 2, 2004 6:40 am | Canfield Industries, Inc. | Product Releases | CommentsThe EOS differential pressure switch provides consistent and repeatable proximity sensing in automated resistance welding operations.
Pc Board Inserts
August 2, 2004 6:40 am | Phoenix Contact | Product Releases | CommentsPower and signal can now be combined into one IP 67 rated industrial plug connection system with Variocon PC board inserts. Available for through panel applications direct to the PC board, these modular contact inserts are available in 90 degrees or straight pins for solder-in connection.
Gearmotors For Use With Adjustable Speed Controls
August 2, 2004 6:40 am | Baldor Electric Company | Product Releases | CommentsA line of new inverter-duty gearmotors is specifically designed for use with adjustable speed controls. The new gearmotor line is rated at 3/8 hp, 230 V, 60 Hz, three phase. An operating range of 10-90 Hz features a broad range of ratios in both right-angle and parallel-shaft configurations.
Programmable Three-phase Drive
August 2, 2004 6:40 am | Danaher Motion | Product Releases | CommentsThe SECO M5000 Series digital, three-phase dc drive is a programmable, microprocessor-based adjustable speed dc drive.
Two-wire Brushless Dc Motor
August 2, 2004 6:40 am | Servo Magnetics Inc. | Product Releases | CommentsA new compact low inertia, 12 V, 2-wire brushless dc motor is designed to facilitate the simplicity of drop-in replacement of a conventional brush motor where long life and quiet operation are essential.
Digital Test Tool For Industrial Environments
August 2, 2004 6:40 am | Fluke Corporation | Product Releases | CommentsThe 87V digital multimeter (DMM) is a test tool designed to maximize productivity and safety in industrial settings. The advanced circuitry of the unit is capable of accurately measuring voltage and frequency on adjustable speed motor drive systems.
Rotary Sensor With Hall Effect Technology
August 2, 2004 6:40 am | Power Components Of Midwest Inc. | Product Releases | CommentsThe RS60 non-contact rotary position sensor uses Hall effect technology that replaces wiping contacts. It is designed for rugged outdoor environments, and features through-hole coupling. It can also be mechanically rotated by drive couplers.
Push-pull Connectors For Electronics Applications
August 2, 2004 6:40 am | Odu-Usa, Inc. | Product Releases | CommentsA line of six-position high-voltage IP 68-rated push-pull connectors is designed for instrumentation and medical OEM electronics. ODU Minisnap miniature cylindrical connectors feature a reliable and easy-to-operate precision push-pull locking system.
Three-phase Solid-state Relay
August 2, 2004 6:40 am | Carlo Gavazzi, Inc. | Product Releases | CommentsThe new RZ3A Series three-phase solid-state relay electronically switches three poles up to 75 amps and can be driven by low input currents, typically available from standard PLCs and temperature controllers.
One-component, Moisture-curing Adhesive Sealant
August 2, 2004 6:40 am | Bostik Findley, Inc. | Product Releases | CommentsLiquid Rivet 1152 FS adhesive/sealant is a one-component, urethane technology designed to offer extremely high thixotropy and strength.
Flowmeter For Precision Filling Control
August 2, 2004 6:40 am | Burkert | Product Releases | CommentsThe Type 8055 Full-Bore Magflowmeter is designed for filling and dosing operations, including data registration. The Type 8055 finds use in sanitary food/beverage processes, pharmaceuticals manufacturing, and water treatment applications.
Motor Clears Up Wiper Woes
August 2, 2004 6:38 am | Johnson Electric | Articles | CommentsIf you've ever driven in a Buffalo winter or the mud in Alabama, you know that rain isn't the only reason to have a good set of windshield wipers on your car. And, not just on the front.
Cryogenic Brushless Servo
August 2, 2004 6:37 am | Empire Magnetics | Product Releases | CommentsCryogenic Series brushless servo motors with resolver feedback are engineered for applications that require reliable operation in extremely cold conditions. The motors have been field-tested in temperatures as low as 20 Kelvins and can potentially operate as low as 0 Kelvins.
Mold Design Software
August 2, 2004 6:37 am | Solidworks Corporation | Product Releases | CommentsSolidWorks 2005 includes MoldflowXpress, a new feature for mold designers. Billed as the first mold design validation tool built into a solid modeling environment, it helps mold designers quickly validate whether a plastic injection-molded part can be filled.
Lightweight Marine Latch
August 2, 2004 6:37 am | Product Releases | CommentsThe Beetle latch offers a compact slam-to-close solution for marine designs. It boasts a brightly polished stainless steel handle resting flush inside a white, black, or stainless steel-covered plastic housing. The latch sits flush to the surface for a sleek outward appearance.
