The Leading Source for Design Engineering News & Insight
No-mix Road Sign Adhesive
December 15, 2003 4:39 am | Product Releases | CommentsPermabond F246 is a two-part, no-mix, surface-activated structural acrylic adhesive aimed for road sign assembly. Designed to replace rivets when joining the sign to a stiffener, the adhesive is said to improve appearance, maintain flexibility, and withstand harsh outdoor climates.
Flexible Crutch/cane Tip
December 8, 2003 4:35 am | Keen Mobility | Product Releases | CommentsThe Adventure Ambulatory Aid Tip is designed to go on the bottom of most crutches and canes to provide the person using them with improved ground contact and safety. The tip does this by allowing the soft EVA foam to flex when the aid is at an angle.
Prosthetic Wrist
December 8, 2003 4:35 am | Reactive Metals | Product Releases | CommentsThe N-Abler 5 Function Wrist is a fully integrated, five-function body powered prosthetic wrist incorporating wrist rotation flexion and extension.
Window Spacer System
December 8, 2003 4:35 am | Truseal Technologies Inc. | Product Releases | CommentsInsuledge is a flexible, warm-edge spacer system used to fabricate insulating glass window units. The warm edge spacers provide for reduced heat transfer around the perimeter of the glass units. It is designed to provide the window market with an alternative to solid, foam, or metal profile spacers.
Aquatic Analysis System
December 8, 2003 4:35 am | Swimming Technology Research | Product Releases | CommentsAquanex+Video is a biomechanical analysis system that simultaneously captures underwater video and measures forces during aquatic activities such as swimming, aquatic therapy, rowing, and running in water.
Medical-grade Seal Compound
December 5, 2003 7:51 am | Product Releases | CommentsEJ590-70 is a specialty healthcare sealing elastomer that is 100 percent carbon-free and suitable for use in medical and dental devices, such as inhaler dispensing valve seals.
Power Supply Inductors
December 5, 2003 7:51 am | Product Releases | CommentsThe DXM Series of power inductors includes low-voltage, high-current units designed for switching power supplies and portable electronics. The magnetic component collects, filters, and smoothes ac ripple current in dc circuits.
Custom Cordset/mating Receptacle
December 5, 2003 7:51 am | Product Releases | CommentsThe M-8 Pico Custom Cordset and Mating Receptacle is a custom designed cable and connector system
Mechanical Design Software
December 5, 2003 7:51 am | Solidworks Corporation | Product Releases | CommentsSolidWorks 2004 is a 3D mechanical design software that streamlines new product design and helps manufacturers in any industry speed products to market. It is designed to accelerate design-to-manufacture so companies can speed products to market in the face of ever-shrinking lead times.
Electromotive Coil Motor
December 5, 2003 7:51 am | Thingap Motor Technologies | Product Releases | CommentsThe TG3300 Series Brush DC Motor is based on patented electromotive coil technology, which eliminates the iron core and wire windings found in conventional motors.
Automated Molding Clamps
December 5, 2003 7:51 am | De-Sta-Co Industries | Product Releases | CommentsExtreme Temperature Pneumatic Clamps are automated devices designed for use in the extreme temperature environments of rotational molding in order to hold mold halves together while they travel in and out of high temperature ovens. They automate the rotational molding process.
Air Nozzle
December 5, 2003 7:51 am | Exair Corp. | Product Releases | CommentsThe Super Air Nozzle is designed to reduce noise levels and air consumption on blowoff, cooling, drying, and cleaning applications. It produces a forceful air-stream with minimal wind shear. The air nozzle is designed to address energy conservation issues.
Valve Manifold System
December 5, 2003 7:51 am | Norgren | Product Releases | CommentsThe VM10 10-mm wide pneumatic valve manifold system is designed to be easy to understand and use with LEDs and clear labeling. It quickly connects via integrated push-in fittings. In addition, it is easy to configure with a free valve island configurator.
Visual Inspection Sensor
December 5, 2003 7:51 am | Banner Engineering Corp. | Product Releases | CommentsPresencePLUS Pro is a new camera-based visual inspection sensor designed to transform costly, complex machine vision systems into a simple, easy-to-use and affordable sensor.
Dental Treatment Device
December 5, 2003 7:51 am | Micro Motors Inc | Product Releases | CommentsThe HealOzone Mark II Dental Device is intended to treat dental caries with an application of ozone. Rather than drilling and filling dental caries, dentists can apply the ozone via a handpiece with a sealing cup attached.
