Scapa 512 is a polyester film for use on silicone and other surfaces. It is single-coated with a silicone adhesive and can withstand prolonged temperatures as high as 350°F. It is a pressure-sensitive tape.
ProSet4 is a cylinder unit with four built-in programmable setpoint outputs for detection of end-stroke or any position in between. The four outputs allow sophisticated motion control without the need for continuous position feedback.
CFDesign Version 7.0 is an upfront CFD with a solid motion module. The module is suitable for use by mechanical engineers during the conceptual and detailed design stages.
The RMC70 Series of motion controllers is available for one- and two-axis systems. It is suitable for hydraulic, pneumatic, and electric servo motion control applications with position, velocity, and position/pressure control capabilities.
Olflex 190 is a multi-conductor control cable designed to perform well in many industrial environments without the use of conduit. It features working voltage of 600 V and a temperature range of -40° to +90°C. Conductor sizes range from 20 AWG through 2 AWG.
A line of radiant heaters is suitable for outdoor comfort heating applications as well as ice and snow melting. The units are available in a variety of sizes and styles and for both fixed and portable applications.
A new system-on-module combines the high performance of a Transmeta TM5900 Crusoe processor with high reliability and extended temperature range. It can be used for deeply embedded industrial PC applications in harsh conditions, such as trains, planes, buses, and other transportation vehicles.
Using advanced electronics and a new microprocessor-based design, the Temposonics G-Series linear position sensor includes fully programmable setup and complete diagnostic capabilities.
The BosScrew is designed to keep plastic assemblies from loosening as a result of plastic creep. This new screw has a series of "pressure wells", or indentations, along the upper face of the thread circumference.
Tool and mold maker Minimould achieved improvements in quality and fill time as a result of using Moldflow software early in the manufacture of a new range of laryngoscopes. These devices are now in production by medical device manufacturer Penlon and Minimould.
The advantages of controlling electric motors with digital signal processors (DSPs) instead of microcontrollers are well established. DSPs can boost operating efficiencies significantly from the 40 percent typically found in microcontroller-controlled motors to as high as 90 percent.
At Great Britain's Royal National Orthopedic Hospital, children who have lost part of their leg bones after suffering from bone cancer are being helped with a new procedure designed to eliminates the need for years of painful surgery.
The MCD 200 Series of soft starters features compact units that offer advanced heat dissipation, eliminating the need for extra ventilation or bypass connectors while simplifying installation and minimizing panel space requirements. The MCD 200 Series covers the 7.5 to 110 kW power range.
Gore Universal Pipe Gaskets are designed to enable users to standardize their gasket applications across steel, glass-lined steel, and FRP systems, or wherever non-metallic gaskets can be used.
These octogonal cross-section O-ring seals, designated Octi-Ring, can be used in applications that would normally require a special seal groove. The new seals are available in virtually every common and many exotic seal materials. They are available for 1/8-in. OD with every size in between.