The Leading Source for Design Engineering News & Insight
Ethernet Data Cables
December 1, 2004 7:08 am | Belden Inc. | Product Releases | CommentsThe DataTuff line includes one two-pair and three four-pair Category 5e cables. The cables are designed to provide superior performance and reliability, even in the presence of electromagnetic interference (EMI) or radio frequency interference (RFI).
Linux Os-based Visual Computer
December 1, 2004 7:08 am | Sgi (Silicon Graphics, Inc.) | Product Releases | CommentsThe Prism takes advanced computer graphics capability and makes it available on a truly open and accessible platform.
Explosion-proof Pressure Sensors
December 1, 2004 7:08 am | American Sensor Technologies, Inc. | Product Releases | CommentsThe Model 4600 is offered with material compatibility and resistance against hydrogen permeation and embrittlement.
Safeguarding Control System
December 1, 2004 7:08 am | Scientific Technologies, Inc. | Product Releases | CommentsThe Perimeter Access Guarding Device PA4600-EP is a long-range, multiple-beam system designed to provide a long operating range (30 m) and wide beam spacing. This system is suitable for torso detection and safeguarding the perimeter of areas where hazardous or explosive materials are present.
Evaluation Torque Sensor
December 1, 2004 7:08 am | Bi Technologies | Product Releases | CommentsThe MagneTorque-compliant torque sensors is designed for evaluation and testing. The sensor is designed to complement potentiometric-based torque sensor technology and can be used for automotive electric power steering systems.
Multi-phase Synchronous Buck Controller
December 1, 2004 7:08 am | Texas Instruments Inc. | Product Releases | CommentsThe TPS40130 has integrated adaptive gate drivers. The flexible power management device is
Closed-end Cartridge System
December 1, 2004 7:08 am | Tah Industries Inc. | Product Releases | CommentsThis system is designed to provide a low cost, based on the reduced number of components to buy, and the elimination of labor to assemble them.
Plastics Design Analysis Software
December 1, 2004 7:08 am | Moldflow | Product Releases | CommentsMoldflow Plastics Insight 5.0 has a strong focus on 3D technology, pre- and post-processing productivity improvements, and a wide range of customer driven enhancements. MPI 5.
Quick-connect Fittings
December 1, 2004 7:08 am | Clippard Instrument Lab., Inc. | Product Releases | CommentsMJQC quick-connect fittings are designed to combine the quick and easy functionality of the Push-Quick Series with the flexibility and security of the MJQC quick-connect line, with no circuit interruption.
Ptfe Spiral Cable Wrap
December 1, 2004 7:08 am | M.M. Newman Corp. | Product Releases | CommentsHeli-Tube protects wiring on lasers and other cutting equipment that is exposed to sparks. It applies like tape and is highly flexible and abrasion resistant. The wrap is chemically inert, non-flammable, and operates over a -450° to +500°F temperature range.
Large-size Aluminum Electrolytic Capacitors
December 1, 2004 7:08 am | Epcos, Inc. | Product Releases | CommentsThese units are distinguished by high vibrational strength and maximum ripple current capability at high temperatures and high frequencies.
Graphical System Monitor For Off-highway Machinery
December 1, 2004 7:08 am | Product Releases | CommentsThe CANLink monitor makes possible up-to-the-minute information on system performance and total operator off-highway vehicle control. Combined electronic technology, this "real-time" display serves as a master controller on off-highway machinery equipment.
Pmc Modules For Serial Communication Boards
December 1, 2004 7:08 am | Acromag Inc. | Product Releases | CommentsThe PMC520 and PMC521 provide eight asynchronous serial communication ports from a single PMC carrier slot. They are designed to reduce the cost per serial port and keep card slot usage to a minimum. Both models are available with front or rear I/O connections for more convenient cable access.
Pneumatic Function Fittings For Rapid Assembly
December 1, 2004 7:08 am | Norgren | Product Releases | CommentsA new line of pneumatic function fittings is designed for users who are seeking to achieve cost savings in the rapid assembly of pneumatic circuits. These compact devices are engineered to provide easy tube insertion and can be deployed in a variety of industry sectors.
Force Restoration Weighing System
December 1, 2004 7:08 am | Mettler Toledo Inc. | Product Releases | CommentsID7sx is an intelligent, high-precision FM and ATEX approved system. It comes complete with a suite of software to monitor, record, and control process data achieved during the weighing process. It is specifically designed to be used in Class I, Div. I and/or Class I, Div.
