Product Design & Development

The Leading Source for Design Engineering News & Insight

Subscribe to Product Design & Development All
View Sample

FREE Email Newsletter

Design Daily

Q&a: Finding The Right Adhesive Mix

June 7, 2005 7:06 am | Product Releases | Comments

By Len Vermillion, Managing Editor Thomas Targosz These days, OEMs are turning to two-component adhesives due to their bonding strength and long shelf life as compared to one-part adhesives. But mixing two adhesive components into one formulation is tricky business.

Dixie Cup Problems

June 6, 2005 6:37 am | Product Releases | Comments

No back pressure: Removing the mixing tube relieves back pressure. With low pressure, leakage due to damaged tubing cannot be detected. Untested mixing: The procedure does not test mixing. The mixing tube has been removed. Minimal testing: The test is performed once a shift.

Foam Insulation Spray Adhesive

June 6, 2005 5:30 am | 3M | Product Releases | Comments

Polystyrene Foam Insulation 78 spray adhesive is ideally suited for a variety of applications using EPS (expanded or extruded polystyrene). Designed to not attack the foam, the adhesive dries quickly in either one or two surface applications and resists temperatures up to 140°F.

Advertisement

Flow-control Valve

June 6, 2005 5:30 am | Sealant Equipment And Engineering, Inc. | Product Releases | Comments

The new 2200-087 Series Flow-Control Valve is designed to start or stop the flow of pressure-fed materials quickly and effectively.

Enclosure With Sheet Metal Base

June 2, 2005 6:07 am | Product Releases | Comments

Designed to offer a unique aesthetic appearance, this enhanced Type 32 enclosure features a reinforced sheet metal base for EMC shielding.

New Signal Sources Have Been Working On The Railway

May 26, 2005 6:02 am | Behlman Electronics Inc. | Product Releases | Comments

The Staten Island Railway System was experiencing problems with its 100 Hz signal power distribution and generation.

True-absolute Rotary Encoder

May 26, 2005 6:02 am | Product Releases | Comments

The Model A19 true-absolute rotary encoder features a resolution of up to 12-bits, a 19-mm aluminum housing, 3-4 mm (0.125 in.) diameter stainless steel solid or blind hollow shaft, precision ball bearings, and SSI output.

Electronic Cold/hot Controller

May 26, 2005 6:02 am | Selco/Ecc | Product Releases | Comments

New 2698 and 2699 Cold/Hot Controllers are built to provide highly sophisticated sensing and control of heating, cooling, and humidity. These electronic controllers are well suited for cooling and heating control in spas and cooking equipment, freezers, refrigerators, and dehumidifiers.

Advertisement

High-speed Progressive Scan Camera

May 26, 2005 6:02 am | Product Releases | Comments

The IPX-1M48-L high-speed progressive scan camera features megapixel resolution and a frame rate beyond that of standard video.

Flexible Bulk Switcher Module

May 26, 2005 6:01 am | Astec Power | Product Releases | Comments

The new DS560-3 bulk switcher module offers a 12 Vdc main output and a 3.3 Vdc standby output, increasing available power to 650 W. This power supply incorporates full RoHS compliance and meets tantalum cap-free industry requirements.

Glass Capacitors Prove Critical To Saturn Probe

May 20, 2005 9:21 am | Avx Corporation | Product Releases | Comments

Ultrastable glass capacitors offer reliable performance for mission critical applications that must withstand the most difficult environments, like a space flight to Saturn.

Terminal Block I/o Module

May 20, 2005 9:21 am | Lumberg, Inc. | Product Releases | Comments

The new e2c 20 I/O product line of “slice style” DIN rail-mountable terminal block I/O modules is designed for use in distributed control enclosures. Features include removable terminal blocks, spring clamp terminals, a module release latch, and color coding for easy identification.

Can Bus Test System

May 20, 2005 9:21 am | Lecroy Corp. | Product Releases | Comments

WaveRunner 6000A Series oscilloscopes with long memory can now be combined with CANbus TD or CANbus TDM to locate CAN Bus physical layer problems and debug CAN Bus controllers and systems. The system allows users to correlate physical layer signals with protocol layer data.

Dynamic Pressure Sensors (10189)

May 20, 2005 9:21 am | Pcb Piezotronics, Inc. | Product Releases | Comments

Series 106 and 116 dynamic pressure sensors measure low-level pressure as well as acoustic and ultrasonic high-intensity sound pressure levels.

Filters, Breathers, And Mufflers

May 20, 2005 9:21 am | Beswick Engineering Co., Inc. | Product Releases | Comments

Applications that have limited space and demand a leak-free environment can take advantage of a line of miniature sintered filters, breathers, and mufflers.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading